EDP Sciences logo
Submit your paper
Search
Menu
All issues Volume 28 / No 1 (2020) Silva Lusitana, 28 1 (2020) 1-13 References
Open Access
Issue
Silva Lusitana
Volume 28, Number 1, 2020
Page(s) 1 - 13
DOI https://doi.org/10.1051/silu/20202801001
Published online 11 September 2020
  • ABNT - Brazilian National Standards Organization, 1997. NBR 7190 - Projeto de estruturas de madeira. ABNT, Rio de Janeiro, Brazil. [Google Scholar]
  • Araujo, S., Boas, M.A.V., Neiva, D.M., Carneiro, A.C., Vital, B., Breguez, M., Pereira, H., 2016. Effect of a mild torrefaction for production of eucalypt wood briquettes under different compression pressures. Biomass and Bioenergy 90: 181–186. [CrossRef] [Google Scholar]
  • ASTM International, 2014. D143–14 - Standard test methods for small clear specimens of timber. ASTM, West Conshohocken, USA. [Google Scholar]
  • Bergman, R., 2010. Drying and control of moisture content and dimensional changes. In Forest Products Laboratory (Org.) Wood Handbook - wood as an engineering material. Forest Products Laboratory, Madison, USA. Chapter 13, pp. 1–20. [Google Scholar]
  • Brito, J.O., Barrichelo, L.E.G., Seixas, F., Migliorini, A.J., Muramoto, M.C., 1983. Análise da produção energética e de carvão vegetal de espécies de eucalipto. IPEF 23: 53–56. [Google Scholar]
  • Campos, C.I., Lahr, F.A.R., 2004. Production and characterization of MDF using eucalyptus fibers and castor oil-based polyurethane resin. Materials Research 7(3): 421–425. [CrossRef] [Google Scholar]
  • Carvalho, A.M., Lahr, F.A.R., Bortoletto Junior, G., 2004. Use of Brazilian Eucalyptus to produce LVL panels. Forest Products Journal 54(11): 61–61. [Google Scholar]
  • Castellano, G.R., Camarinho, R.J., Arthur Junior, J.C., Sixel, R.M.M., Silva, P.H.M., 2013. Crescimento de eucaliptos quase centenários no horto de Rio Claro, 1st ed. In Circular Técnica IPEF, IPEF, Piracicaba, Brazil, Volume 205, pp. 1–12. [Google Scholar]
  • Chopra, R.N., Chopra, I.C., Handa, K.L., Kapur, L.D., 2006. Chopra’s indigenous drugs of India. 2nd ed. Academic Publishers, Kolkata, India, pp. 1–816. [Google Scholar]
  • Du, H., Zeng, F., Peng, W., Wang, K., Zhang, H., Liu, L., Song, T., 2015. Carbon storage in a Eucalyptus plantation chronosequence in Southern China. Forests 6(6): 1763–1778. [CrossRef] [Google Scholar]
  • Eiras, K.M.M., Colodette, J.L., Silva, V.L., Barbosa, L.C.B., 2008. New insights on brightness stability of eucalyptus kraft pulp. Nordic Pulp and Paper Research Journal 23(1): 102–107. [CrossRef] [Google Scholar]
  • El Yousfi, M., 1992. Possibilités de lutte préventive contre Phoracantha semipunctata (F.) par la sélection d’espèces d’Eucalyptus. Boletin de Sanidad Vegetal Plagas 18: 735–743. [Google Scholar]
  • Eufrade Junior, H.J., Melo, R.X., Sartori, M.M.P., Guerra, S.P.S., Ballarin, A.W., 2016. Sustainable use of eucalypt biomass grown on short rotation coppice for bioenergy. Biomass and Bioenergy 90: 15–21. [CrossRef] [Google Scholar]
  • Glass, S.V., Zelinka, S.L., 2010. Moisture relations and physical properties of wood. In Forest Products Laboratory (Org.) Wood Handbook - wood as an engineering material. Forest Products Laboratory, Madison, USA. Chapter 4, pp. 1–19. [Google Scholar]
  • Gomide, J.L., Oliveira, R.C., Colodette, J.L., 1980. Produção de polpa kraft de eucalipto, com adição de antraquinona. Revista Árvore 4: 203–214. [Google Scholar]
  • Gominho, J., Lourenço, A., Miranda, I., Pereira, H., 2015. Radial and axial variation of heartwood properties and extractives in mature trees of Eucalyptus globulus. BioResources 10(1): 721–731. [Google Scholar]
  • Gouvêa, A.F.G., Trugilho, P.F., Colodette, J.L., Lima, J.T., Silva, J.R.M., Gomide, J.L., 2009. Avaliação da madeira e da polpação kraft em clones de eucaliptos. Revista Árvore 33: 1175–1185. [CrossRef] [Google Scholar]
  • Gutiérrez, G.L., 1976. Atlas del eucalipto: información y ecologia, 1st edn. Inia-Icona, Sevilla, Spain, Volume 1, pp. 1–140. [Google Scholar]
  • Hill, K.D., 1999. A taxonomic revision of the white mahoganies, Eucalyptus series Acmenoideae (Myrtaceae). Telopea 8(2): 219–247. [CrossRef] [Google Scholar]
  • Jacobson, M., 1975. Insecticides from plants: a review of the literature, 1954–1971. 1st ed.. Agricultural Research Service/USDA, Washington, USA. pp. 1–138. [Google Scholar]
  • Jankowsky, I.P., Aguiar, O.J.R., 1983. Manufatura de painéis compensados com Eucalyptus: caracterização de diversas espécies. Revista Floresta 14(1): 46–53. [Google Scholar]
  • Jolly, N.W., 1949. The genus Eucalyptus - its past and its future in Pacific forests. New Zealand Journal of Forestry 5(5): 389–400. [Google Scholar]
  • Lahr, F.A.R., Nogueira, M.C.J.A., de Araujo, V.A., Vasconcelos, J.S., Christoforo, A.L., 2017. Physical-mechanical characterization of Eucalyptus urophylla wood. Engenharia Agrícola 37(5): 900–906. [CrossRef] [Google Scholar]
  • Kokwaro, J.O., 1994. Flowering plant families of East Africa: an introduction to plant taxonomy. 1st ed.; English Press, Nairobi, Kenya. pp. 1–293. [Google Scholar]
  • Kuhlmann, J.G., 1946. O gênero Eucalyptus no Brasil. Arquivos do Serviço Florestal 2(2): 1–37. [Google Scholar]
  • Martinez-Ruiz, R., Azpíroz-Rivero, H.S., Rodríguez, J.L., Cetina-Alcalá, V.M., Gutiérrez-Espinosa, M.A., 2006. Importancia de las plantaciones forestales de Eucalyptus. Ra Ximhai 2(3): 815–846. [Google Scholar]
  • Martins, S.A., del Menezzi, C.H.S., Ferraz, J.M., Souza, M.R., 2013. Bonding behavior of Eucalyptus benthamii wood to manufacture edge glued panels. Maderas, Ciencia y Tecnología 15(1): 79–92. [Google Scholar]
  • Melo, E.A.S.C., Gonçalves, J.L.M., Rocha, J.H.T., Hakamada, R.E., Bazani, J.H., Wenzel, A.V.A., Arthur, J.C., Jr., Borges, J.S., Malheiros, R., Lemos, C.C.Z., Ferreira, E.V.O., Ferraz, A.V., 2016. Responses of clonal eucalypt plantations to N, P and K fertilizer application in different edaphoclimatic conditions. Forests 7(1): 1–15. [Google Scholar]
  • Nobakht, M., Grkovic, T., Trueman, S.J., Wallace, H.M., Katouli, M., Quinn, R.J., Brooks, P.R., 2014. Chemical constituents of kino extract from Corymbia torelliana. Molecules 19(11): 17862–17871. [CrossRef] [Google Scholar]
  • Nogueira, M.C.J.A., Almeida, D.H., Vasconcelos, J.S., Almeida, T.H., de Araujo, V.A., Christoforo, A.L., Lahr, F.A.R., 2018a. Properties of Eucalyptus umbra wood for timber structures. International Journal of Materials Engineering 8(1): 12–15. [CrossRef] [Google Scholar]
  • Nogueira, M.C.J.A., de Araujo, V.A., Vasconcelos, J.S., Gutierrez-Aguilar, C.M., Cruz, J.N., Vasconcelos, J.C.S., Prataviera, F., Christoforo, A.L., Lahr, F.A.R., 2018b. Caracterización físico-mecánica de la madera de Eucalyptus camaldulensis para uso estructural proveniente de Restinga. Brasil. Revista Forestal del Perú 33(1): 52–62. [Google Scholar]
  • Pereira, J.C.D., Sturion, J.A., Higa, A.R., Higa, R.C.V., Shimizu, J.Y., 2000. Características da madeira de algumas espécies de eucalipto plantadas no Brasil, 1st ed., Embrapa Florestas, Colombo, Brazil, Volume 38, pp. 1–113. [Google Scholar]
  • Regional Forest Assessments, 1997. Forest resource enhancement opportunities for Southeast Queensland: a review of silviculture studies, 1st ed, Regional Forest Assessments / Department of Natural Resources, Meiers Road, Australia, pp. 1–58. [Google Scholar]
  • Reuber, B., 2015. 21st Century homestead: beekeeping, 1st ed, Lulu Press, Raileigh, USA. pp. 1–252. [Google Scholar]
  • Rudman, P., 1962. The causes of natural durability in timber pt. VIII: the causes of decay resistance in tallowwood (Eucalyptus microcorys F. Muell.), white mahogany (Eucalyptus triantha Link.) and mountain ash (Eucalyptus regnans F. Muell). Holzforschung 16(2): 56–61. [CrossRef] [Google Scholar]
  • Schauer, J.C., 1843. Ordo LXXXVII. Myrtaceae R.Br. In Walpers, G.G. (Ed.) Repertorium Botanices Systematicae. Lipsiae. Volume 2, pp. 920–933. [Google Scholar]
  • Seca, A.M.L., Domingues, F.M.J., 2006. Basic density and pulp yield relationship with some chemical parameters in eucalyptus trees. Pesquisa Agropecuaria Brasileira 41(12): 1687–1691. [CrossRef] [Google Scholar]
  • Silva, P.H.M., Brito, J.O., Silva Junior, F.G., 2006. Potential of eleven Eucalyptus species for the production of essential oils. Scientia Agricola 63(1): 85–89. [CrossRef] [Google Scholar]
  • Smith, I., Landis, E., Gong, M., 2003. Fracture and fatigue in wood, 1st ed. John Wiley, West Sussex, UK. pp. 1–242. [Google Scholar]
  • Stokoe, R.L., Sheperd, M., Lee, D.J., Garth Nikles, D., Henry, R.J., 2001. Natural intersubgeneric hybridization between Eucalyptus acmenoides Schauer and Eucalyptus cloeziana F. Muell (Myrtaceae) in Southeast Queensland. Annals of Botany 88(4): 563–570. [CrossRef] [Google Scholar]
  • Tomazello Filho, M., 1985. Estrutura anatómica da madeira de oito espécies de eucalipto cultivadas no Brasil. IPEF, 29, 25–36. [Google Scholar]
  • Tonoli, G.H.D., Savastano Junior, H., Fuente, E., Negro, C., Blanco, A., Lahr, F.A.R., 2010. Eucalyptus pulp fibres as alternative reinforcement to engineered cement- based composites. Industrial Crops and Products 31(2): 225–232. [CrossRef] [Google Scholar]
  • Verdcourt, B.. 2001. Flora of Tropical East Africa. 1st ed. CRC Press, United Kingdom, pp.1–484. [Google Scholar]
  • Vieira, R.S., Lima, J.T., Silva, J.R.M., Hein, P.R.G., Baillères, H., Baraúna, E.E.P., 2010. Small wooden objects using eucalypt sawmill wood waste. BioResources 5(3): 1463–1472. [Google Scholar]
  • Vieira, R.S., Lima, J.T., Silva, J.R.M., Hein, P.R.G., Boutahar, N., 2008. Valorisation de résidus d’Eucalyptus utilisés pour la fabrication de coffrets éducatifs. Bois et Forêts des Tropiques (298): 49–51. [Google Scholar]
  • Wallis, N.K., 1970. Australian timber handbook. 3rd ed. Angus & Robertson, Sydney, Australia, pp. 1–379. [Google Scholar]
  • Wellbrock, N., Grüneberg, E., Riedel, T., Polley, H., 2017. Carbon stocks in tree biomass and soils of German forests. Central European Forestry Journal 63: 105–112. [CrossRef] [Google Scholar]

Current usage metrics show cumulative count of Article Views (full-text article views including HTML views, PDF and ePub downloads, according to the available data) and Abstracts Views on Vision4Press platform.

Data correspond to usage on the plateform after 2015. The current usage metrics is available 48-96 hours after online publication and is updated daily on week days.

Initial download of the metrics may take a while.